search:s11 s21係數相關網頁資料

      • www.infinet.com.tw
        使用Agilent N9340A 執行S11 和S21 量測 應用手冊 序言 頻譜特性對無線通訊系統的維護很重要。有時必須使用網路和頻譜分析儀來量測RF / 微波裝置,如放大器、濾波器和天線,的傳輸與反射特性。當DUT 的相位資訊不重要
        瀏覽:472
      • wendaku.org
        請問有關網路分析儀的問題?? 的薪水。 還有dB是比值,不是什麼直流電壓。至於怎麼設定?真是大哉問。 你要量什麼? S11 or S21?要量主動元件還是被動元件? ...
        瀏覽:740
    瀏覽:608
    日期:2024-07-27
    既然是反射係數 ,那就可以用史密斯圖來觀察了,史密斯圖可以想做是把直角座標的Y軸上下盡頭拉到X軸最右邊所形成 水平軸表示實數R,水平軸以上平面表示電感性,水平軸以下平面表示電容性 ......
    瀏覽:859
    日期:2024-07-25
    2014年5月7日 - 良好的傳輸線,訊號從一個點傳送到另一點的失真(扭曲),必須在一個可接受的程度內。而如何去衡量傳輸線互連對訊號的影響,可分別從時域與頻域 ......
    瀏覽:905
    日期:2024-07-27
    ... 器進入Port 1,Port 2接至50Ω之Termination,此時所量測到的Reflection及Transmission功率比值分別為S11及S21 反射係數: Reflection及Transmission功率比值 [ 快速連結 ] ......
    瀏覽:1202
    日期:2024-07-27
    s11 reflection coefficient at port1 for port 2 matchs to 50ohms s22 reflection coefficient at port2 for ... Let a(i)=V(1,+)/sqrt(Zo)=I(1,+)*sqrt(Zo), b(i)=V(1,-)/sqrt(Zo)=-I(1,-)*sqrt(Zo),Then, b(1)=S11*a(1)+S12*a(2), b(2)=S21*a(1)+S22*a(2)....
    瀏覽:700
    日期:2024-07-29
    ... 02:33:54 1997 >標題: 請問S11和S12的意義? >S11和S21是怎麼取名的啊?又各代表什麼意思呢? >S11=>反射係數 >S21=>穿透係數 >誰可以跟我解釋一下!謝謝! 詳細可參考microwave engineering (David M.Pozar) P:221...
    瀏覽:876
    日期:2024-07-25
    回波損耗、反射係數、電壓駐波比以及S參數的物理意義_布拉格_新浪博客,布拉格, ... 以二埠網路為例,如單根傳輸線,共有四個 S 參數: S11,S12,S21,S22,對於互易網路有 S12 = S21,對於對稱網路有 S11 = S22,對於無耗網路,有 S11*S11+S21*S21 = ......
    瀏覽:1490
    日期:2024-07-28
    Calculate input impedance and reflection coefficient. r = (Zin - 50Ω)/(Zin + 50Ω) S11 (dB) = 20*log(r) Single element two port networks ... in order to measure s21 and s11 by using VNA and the antenna apparatus, does the distance between the antennas will...
    瀏覽:973
    日期:2024-07-29
    S-parameters for an antenna are introduced. S11 is known as the return loss, or how much power is reflected from the transmitter to an antenna. S21 or S12 represents power coupled from one port to another, a useful parameter for determining coupled power ...